Wireless M-Bus Module| M-Bus for Smart Metering
ECL-WMBUS is designed mainly for use in remote wireless water meter reading applications. It has different options to be used in small and large M-Bus systems.
SPECIFICATIONS
- Size: 42,5x10x25mm
- -35 … +75°C operating temperature
- -40 … +85°C storing temperature
- +3.3 VDC supply max:50mA
- 3V3 TTL UART
- Baud Rate : 115200bps
- 433, 868, 915MHz ISM
- TX at +10 dBm: 13.4 mA
- Receiver Sensitivity –124 dBm Using
- Long-Range Mode, –110 dBm at 50 kbps
- Selectivity (±100 kHz): 56 dB
- Blocking Performance (±10 MHz):90 dB
- Programmable Output Power up to +15 dBm
- Single-Ended or Differential RF Interface
- Suitable for Systems Targeting Compliance with Worldwide Radio Frequency Regulations
ETSI EN 300 220, EN 303 204 (Europe)
Open Metering System (OMS)
FCC CFR47 Part 15 (US)
ARIB STD-T108 (Japan)
Wireless M-Bus (EN 13757-4) and IEEE®802.15.4g PHY - U.FL socket connector
- Optional Chip antenna support
- Supports T1, C1, T2, C2 Modes
- Ready M-Bus wireless stack, where there is no limit in the number of devices to be supported
- WMB64 – Up to 64 Wireless M-Bus Slaves
- WMB128 – Up to 128 Wireless M-Bus Slaves
- WMB256 – Up to 256 Wireless M-Bus Slaves
RELATED PRODUCTS
M-Bus NB-IoT Gateway ECL-GW-T8-NB-MB
ECL-GW-T8-NB-MB is an NB-IoT M-Bus gateway designed for remote water metering.
CAT1/RF/MBus Linux Data Concentrator
ECL-DC-Linux-LTE-MB-C1 acts as a transparent bridge between wired, wireless M-Bus, Ethernet and RS485 interfaces of water and electricity meters and similar 3rd party devices and Head-End Systems.