Wired M-Bus Module| M-Bus for Smart Metering
ECL-MBUS is designed mainly for use in remote water meter reading applications. It has different options to be used in small and large M-Bus systems.
SPECIFICATIONS
- Size: 41x10x24,5 mm
- -35 … +75°C operating temperature
- -40 … +85°C storing temperature
- +12VDC supply max: 500mA for M-Bus
- 3.3VDC for TTL interface
- 3V3 TTL UART
- Baud Rate : 300bps-19200bps
- 35,5 VDC Bus voltage
- Max Output Current 110mA
- Max 64 Slaves
- M-Bus interface can power up to 64 devices/slaves with a maximum current requirement of 1.5mA each
- Current limitation protects the interface from an overload or short circuit on the M-Bus
- Cable length can be up to 1 km
- M-Bus interface can power up to 20 devices/slaves with a maximum current requirement of 1.5mA each.
- Current limitation protects the interface from an overload or short circuit on the M-Bus. The cable length can be up to 10 km.
- MB1 – Wired MBUS Module (1 Slave)
- MB64 – Wired MBUS Module (64 Slaves)
- MB128 – Wired MBUS Module (128 Slaves)
- MB256 – Wired MBUS Module (256 Slaves)
RELATED PRODUCTS
M-Bus NB-IoT Gateway ECL-GW-T8-NB-MB
ECL-GW-T8-NB-MB is an NB-IoT M-Bus gateway designed for remote water metering.
CAT1/RF/MBus Linux Data Concentrator
ECL-DC-Linux-LTE-MB-C1 acts as a transparent bridge between wired, wireless M-Bus, Ethernet and RS485 interfaces of water and electricity meters and similar 3rd party devices and Head-End Systems.