Grid Monitoring ECL-PNM
ECL-PNM has been developed for collecting information about the current status of the Power Line. It is able to monitor 6 Three-Phase lines and 18 Single-Phase lines. There are 2 “RS485″ ports available. Due to the advantage of two different Rs485 ports, the device allows the user to transmit 2 different data queries simultaneously or seperately.
ECL-PNM doesn’t need additional power supply. Modbus RTU Address can be assigned by a DIP switch
SPECIFICATIONS
- Size : 117 x 157 x 60 mm
- Weight : ~450 gram
- -20 … +70°C operating temperature
- No additional Power Supply needed(100 … 240 VAC)
- 2 x RS485 Interface
- Baud Rate 115200
- 6 x Optically Isolated Three-Phase Line Voltage Detectors(18 x Single-Phase + 6 Neutral)
- 18 x Dry Contact Inputs
- Optically Isolated Line Voltage Inputs
- Modbus RTU Protocol
- Modbus Address Selection by DIP Switch
- Power can be supplied from any of the connected phases
- In case of outage on all phases, internal supercapacitor feeds the device for at least 30 seconds
- DIN Rail Mountable
- FCC, IC, IP54
- PTCRB
- R&TTE/CE GCF RoHS/WEEE/CCC
- GSM 07.07, GSM 07.05, GSM 03.40, GSM 04.11, GSM 03.38, GSM 11.10-1, GSM 02.30, GSM 03.90, GSM 11.14, ITU-T V.25ter, SMG31, GSM 05.02, ETSI 07.60, ETSI 0.7.07