NB-IoT Terminals | NB-IoT for Smart Metering
ECL-BG96-T10
ECL-BG96-T10 builds a transparent communication platform between field devices via serial ports and remote servers or applications over cellular networks. It supports LTE Cat M1/Cat NB1/EGPRS bands and 375 kbps uplink, 375 kbps downlink speed. It supports GPS, GLONASS, BeiDou/Compass, Galileo, QZSS.
With the over the air (OTA) protocol, application software and firmware can be updated remotely. Updates, upgrades and troubleshooting can be done remotely without the need to go to the field.
Supports various IOT verticals such as smart metering, smart lighting, vehicle tracking etc, where firmware is optionally available to do on-site reading. It can run as a transparant device to transmit the querries of the central IOT platform (pull mode) and simultaneously runs as a field device to read devices and transmit data to central IOT platform (push mode).
Distributed, Multi-Layer, Multi-threaded System Server Architecture enables maximum real-time interaction among modules and scalability.
It has integrated hardware watchdog feature which protects the device against hardware and firmware crashes. Real-time clock feature can be used for timestamp applications. Sealable cover protects against tamper
SPECIFICATIONS
- Size : 106mmx107mmx55mm
- Weight : ~300 grams
- -35 … +75°C operating temperatur
- -40 … +85°C storing temperature
- 55…435VAC operating voltage
- 6 KV Impact Resistance
- LTE Cat M1/Cat NB1/EGPRS Support
- LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28
- LTE TDD: B39 (For CAT M1 only)
- EGPRS: 8501900/1800/900/MHz
- Sleep Mode Power Consumption: 10uA
- Wireless M-Bus, IEEE 802.15.4g
- Main and GNSS Antenna Interfaces
- 1 x RS485 Interface & ECLWMBUS serial meter connections
- 1 x RS232 Interface
- 300bps – 460kbps communication speed
- 7E1, 7O1, 8N1, 8E1, 8O1 frame
- RS485 ADDC
- 1 x 250 VAC 10A Relay Output (NO,NC)
- 4 x Dry Contacts
- ARM Microprocessor(32-bit ARM® Cortex®-M4 120Mhz 1Mbyte Flash)
- Real Time Clock (RTC)
- Built In Flash Memory(4Mbyte)
- GNSS: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
- Hardware watchdog
- NB-IoT LED Status Indicator
- Integrated UDP/IP4 support
- Can send alerts to central server in case of power cut-off
- Wide library of meter protocols & new protocols easily adapted
- In-built processing Power/Memory
- Event Logs, AlarmsPush/Pull/Poll communication
- Configuration via serial port or over the air
- Firmware update over the air
- Ability to restrict IP / Port / Phone numbers
- Trasparent communication / gateway
- Direct meter reading and transmit meter data to server/central software
- Automatic speed change
- ID and password authentication
- Detailed event log and troubleshooting
- UDP/IP Server and Client Mode
- Saving readout data on flash memory and prevent data loss
- Remote and local time synchronization
- SIM management support
CE, ROHS
RELATED PRODUCTS
Cat M1/NB-IoT Gateway ECL-BG96-T10
ECL-BG96-T10 builds a transparent communication platform between field devices via serial ports and remote servers or applications over cellular networks.
M-Bus NB-IoT Gateway ECL-GW-T8-NB-MB
ECL-GW-T8-NB-MB builds a transparent communication platform between field devices via serial ports and remote servers or applications over cellular networks.
ECL-BC66-T3 builds a transparent communication platform between field devices via serial ports and remote servers or applications over cellular networks.